Ripping Rumber

On ripping Rumber.

Use a saw blade 7.25 x 24 Carbide tip with set.

Obtain a good quality circular saw ripping blade with 24 carbide tipped large teeth. The saw kerf is normally 1/8" have your professional saw sharpener widen the kerf to 1/4". This usually makes cutting Rumber Boards much easier by cutting a wider path.


Product List
Site Map
Quotations
Shipping
Terms

New Century NORTHWEST LLC
775 Vincent Street
Eugene, Oregon 97401
Phone: (541) 342-4500 Fax: (541) 485-5566
E-MAIL support@ncnwest.com HOME PAGE