---

Rubber Lumber - Rumber®

---

Rubber Lumber Deck

• Density / Specific Gravity g/cc .902
• Modulus of Elasticity psi 2,800
• Compression Strength psi 19,000
• Long Span Modulus psi 17,900
• Compression Strength psi 23,000
• Ultimate Tensile Strength psi 3,181
• Coefficient of Friction wet/dry ratio .42/.38 regular
• Coefficient of Friction wet/dry ratio .19/.06 buffed
• Coefficient of Friction wet/dry ratio 4.6/4.1 regular
• Coefficient of Friction wet/dry ratio 7.2/6.8 buffed
• Coefficient of Thermal Expan. in/in. C 1.1 x 10
• Water Absorption % .08
• Abrasion Resistance in. .02
• Self Ignition Temperature F 620
• Flash Ignition Temperature F 470
• Flame Spread % 100

Possible Applications

Ship surface decking	Dockside
Equipment storage areas	Non-Skid walkways
Ladder treads	Vibration & Sound reduction
Dry-Dock facilities	Shock absorption
Off shore drilling facilities	Electrical insulating application
Catwalks	Trailer Decking
Decks	Ramps

Details / Technical information Rumber® lumber is unique in that it is the only patented alternative lumber product that combines HDPE with tire rubber. This combination has many advantages over our competitors: · Both SBR and HDPE are impervious to moisture. Some alternatives are made with blowing agents to reduce the weight of the product. However, this process also creates air gaps in the material that moisture can penetrate. Rumber® is not made with bonding agents and does not have air gaps · The combination of SBR and HDPE creates a material that is very stable and not subject to expansion and contraction. · Rumber® can be expected to move less than 1/2" in twenty foot length. · Rumber® has a natural non-slip surface, and it can be buffed to provide a super non-slip surface · Rumber® comes with a limited warranty. · Rumber® is maintenance free ! There is no need for paints or stains. It will maintain its pleasant natural gray or black color long into the future. · Rumber® is available in regular boards or tongue & groove boards Rumber's® original application in Texas and Oklahoma. A harsh climate that ranges from zero to well exceeding a hundred degrees. Rumber® has increased the life of the decking from 4-6 months to 4-5 years ! This same incredible material is also esthetically pleasing enough to be used as exterior decking and interior flooring in a class 'A' family restaurant in a southern California beach community. Rumber's® natural extrusion (un-buffed) provides a better gripping surface than any other 'plastic-boards' and better than lumber in the direction of the grain. Rumber® 'buffed' surface provides a 'super' non-skid surface that is hard to beat ! I believe all this is quite an accomplishment, especially for a product that is not only made from waste stream materials, but also contains The dreaded and feared worn-out tire ! No less than 45·% of Rumber® is make-up is post consumer tire ! Installation Requirements For deck applications for dock,yard,rest. etc. 16" centers are recommended

Description	Size	Color	Surface	Part Number	1'-999'	1,000'- 4,999'	5,000'+
1 x 8 Board	7/8" x 6-3/4"	Black	Smooth	9801	$3.10'	$2.35'	$1.90'
1 x 8 Board	7/8" x 6-3/4"	Grey or Terra Cotta	Smooth	9801-C	N/A	$3.35'	$3.10'
1 x 8 Board	7/8" x 6-3/4"	Black	Traction	9802	$3.10'	$2.35'	$1.90'
1 x 8 Board	7/8" x 6-3/4"	Black	Diamond	9803	$3.10'	$2.35'	$1.90'
2 x 4 Board	1-1/2" x 3-1/2"	Black	Smooth	9601	$2.55'	$1.90'	$1.60'
2 x 4 Board	1-1/2" x 3-1/2"	Grey or Terra Cotta	Smooth	9601-C	N/A	$2.60'	$2.50'
2 x 4 Board	1-1/2" x 3-1/2"	Black	Traction	9602	$2.55'	$1.90'	$1.60'
2 x 6 T & G	1-1/2" x 5-1/2"	Black	Smooth	9501	$3.40'	$2.90'	$2.40'
2 x 6 T & G	1-1/2" x 5-1/2"	Black	Traction	9502	$3.40'	$2.90'	$2.40'
2 x 6 T & G	1-1/2" x 5-1/2"	Grey or Terra Cotta	Traction	9502-C	N/A	$3.70'	$3.50'
2 x 6 Board	1-1/2" x 5-1/2"	Black	Smooth	9503	$3.50'	$3.00'	$2.50'
2 x 6 Board	1-1/2" x 5-1/2"	Grey or Terra Cotta	Smooth	9503-C	N/A	$3.80'	$3.60'
2 x 6 Board	1-1/2" x 5-1/2"	Black	Traction	9504	$3.50'	$3.00'	$2.50'
2 x 6 Board	1-1/2" x 5-1/2"	Grey or Terra Cotta	Traction	9504-C	N/A	$3.80'	$3.60'
2 x 8 T & G	1-1/2" x 7"	Black	Smooth	9101	$3.85'	$3.30'	$2.75'
2 x 8 T & G	1-1/2" x 7"	Grey or Terra Cotta	Smooth	9101-C	N/A	$4.90	$4.45'
2 x 8 T & G	1-1/2" x 7"	Black	Traction	9102	$3.85'	$3.30'	$2.75'
2 x 8 Board	1-1/2" x 7"	Black	Smooth	9103	$3.95'	$3.40'	$2.85'
2 x 8 Board	1-1/2" x 7"	Grey or Terra Cotta	Smooth	9103-C	N/A	$4.75'	$4.55'
2 x 8 Board	1-1/2" x 7"	Black	Traction	9104	$3.95'	$3.40'	$2.85'
2 x 8 T&G	1-1/2" x 7-1/16"	Black	Smooth	9301	$3.85'	$3.30'	$2.75'
2 x 8 T&G	1-1/2" x 7-1/16"	Black	Traction	9302	$3.85'	$3.30'	$2.75'
2 x 8 Board	1-3/4" x 7-1/4"	Black	Smooth	9401	$4.10'	$3.55'	$3.00'
2 x 8 Board	1-3/4" x 7-1/4"	Black	Traction	9402	$4.10'	$3.55'	$3.00'
2 x 8 Board	1-3/4' x 8-1/8"	Black	Smooth	9403	$4.80'	$4.30'	$3.65'
2 x 8 Board	1-3/4' x 8-1/8"	Black	Traction	9404	$4.80'	$4.30'	$3.65'

Decking Warranty / Cutting Rumber / Specs

---

---

New Century NORTHWEST LLC
775 Vincent Street
Eugene, Oregon 97401
Phone: (541) 342-4500 Fax: (541) 485-5566
E-MAIL support@ncnwest.com HOME PAGE