Horse Trailer Decking - Rumber®
Rubber Lumber Trailer Deck Products
Rubber Lumber
Rubber Lumber Details / Technical information Rumber® lumber is unique in that it is the only patented alternative lumber product that combines HDPE with tire rubber. This combination has many advantages over our competitors: · Both SBR and HDPE are impervious to moisture. Some alternatives are made with blowing agents to reduce the weight of the product. However, this process also creates air gaps in the material that moisture can penetrate. Rumber® is not made with bonding agents and does not have air gaps · The combination of SBR and HDPE creates a material that is very stable and not subject to expansion and contraction. · Rumber® can be expected to move less than 1/2" in twenty foot length. · Rumber® has a natural non-slip surface, and it can be buffed to provide a super non-slip surface · Rumber® comes with a limited warranty. · Rumber® is maintenance free ! There is no need for paints or stains. It will maintain its pleasant natural gray or black color long into the future. · Rumber® is available in regular boards or tongue & groove boards
Rubber Lumber
Rumber's® original application as stock & horse trailer decking in Texas and Oklahoma. A harsh climate that ranges from zero to well exceeding a hundred degrees. On the decks of these trailers, Rumber® boards endure the extreme weight and grinding of several types of tractor treads , rollers and wheels. In many situations, Rumber® has increased the life of the decking from 4-6 months to 4-5 years ! Rumber's® natural extrusion (un-buffed) provides a better gripping surface than any other 'plastic-boards' and better than lumber in the direction of the grain. Rumber® 'buffed' surface provides a 'super' non-skid surface that is hard to beat ! I believe all this is quite an accomplishment, especially for a product that is not only made from waste stream materials, but also contains The dreaded and feared worn-out tire ! No less than 45·% of Rumber® is make-up is post consumer tire ! Installation Requirements
Size
Under 40,000 G.V.W.
Over 40,000 G.V.W.
Type
(tilt deck, utility)
(low boy)
Centers bracing
9" maximum 2" x 3/8" angle or channel iron
9" maximum 3" x 3/8" angle or channel iron
Description Size Color Surface Part
Number		 1'-999' 1,000'-
4,999'		 5,000'+
1 x 8 Board 7/8" x 6-3/4" Black Smooth 9801


1 x 8 Board 7/8" x 6-3/4" Grey or
Terra Cotta		 Smooth 9801-C N/A

1 x 8 Board 7/8" x 6-3/4" Black Traction 9802


1 x 8 Board 7/8" x 6-3/4" Black Diamond 9803


2 x 4 Board 1-1/2" x 3-1/2" Black Smooth 9601


2 x 4 Board 1-1/2" x 3-1/2" Grey or
Terra Cotta		 Smooth 9601-C N/A

2 x 4 Board 1-1/2" x 3-1/2" Black Traction 9602


2 x 6 T & G 1-1/2" x 5-1/2" Black Smooth 9501


2 x 6 T & G 1-1/2" x 5-1/2" Black Traction 9502


2 x 6 T & G 1-1/2" x 5-1/2" Grey or
Terra Cotta		 Traction 9502-C N/A

2 x 6 Board 1-1/2" x 5-1/2" Black Smooth 9503


2 x 6 Board 1-1/2" x 5-1/2" Grey or
Terra Cotta		 Smooth 9503-C N/A

2 x 6 Board 1-1/2" x 5-1/2" Black Traction 9504


2 x 6 Board 1-1/2" x 5-1/2" Grey or
Terra Cotta		 Traction 9504-C N/A

2 x 8 T & G 1-1/2" x 7" Black Smooth 9101


2 x 8 T & G 1-1/2" x 7" Grey or
Terra Cotta		 Smooth 9101-C N/A

2 x 8 T & G 1-1/2" x 7" Black Traction 9102


2 x 8 Board 1-1/2" x 7" Black Smooth 9103


2 x 8 Board 1-1/2" x 7" Grey or
Terra Cotta		 Smooth 9103-C N/A

2 x 8 Board 1-1/2" x 7" Black Traction 9104


2 x 8 T&G 1-1/2" x 7-1/16" Black Smooth 9301


2 x 8 T&G 1-1/2" x 7-1/16" Black Traction 9302


2 x 8 Board 1-3/4" x 7-1/4" Black Smooth 9401


2 x 8 Board 1-3/4" x 7-1/4" Black Traction 9402


2 x 8 Board 1-3/4' x 8-1/8" Black Smooth 9403


2 x 8 Board 1-3/4' x 8-1/8" Black Traction 9404


Decking Warranty / Livestock Trailer Warranty / Cutting Rumber / Specs
Product List
Site Map
Quotations
Shipping
Terms
New Century NORTHWEST LLC
775 Vincent Street
Eugene, Oregon 97401
Phone: (541) 342-4500 Fax: (541) 485-5566
E-MAIL support@ncnwest.com HOME PAGE