Rolled Rubber Maintenance Procedures


Steps
Cleaning Products
Dilute oz. / gal*
Approx Coverage
sq. ft. / gal.*
Equipment
Initial / Regular
Maintenance
ClenVia CV1000
Cleanbreak Cleaner
Disinfectant or
Taski profi
2-3 oz.
200 - 400
Micro fiber mop
followed with a wet
vacuum or
Commercial electric
scrubber extractor
Spot Cleaning
Wet area with
CleanVia CV1000
ClanBreak Cleaner
Disinfectant or
Taski profi
1 oz.
200 - 400
Micro fiber mop,
damp cloth or
paper towel
Heavy Soil
CleanVia CV1000
ClanBreak Cleaner
Disinfectant or
Taski profi
32 oz.
200 - 400
Micro fiber mop
followed with a wet
vacuum or
Commercial electric
scrubber extractor
* Dilution and coverage specifications relate to the Clean Via CV 1000 product only.
   Follow manufactures recommendations for other products

1. Maintenance Procedures

a. Initial and Regular Maintenance


i.
Remove all surface dirt and debris by vacuuming, sweeping, damp cloth or micro fiber mopping. Commercial grade electric floor scrubber/extractor equipment is recommended for large or high traffic areas. If using a commercial  floor cleaner, use the softest bristle attachment available with a minimum amount of pressure.


ii.
Scrub area with a cleaning product which has a ) a neutral pH (7-9)  b0 low solids and c) low voc's such as CleanVia CV1000, CleanBreak Cleaner, Disinfectant or Taski profi cleaner mixed to the manufactures instructions.


iii.
Remove soiled solution with a wet vacuum or floor extractor.
look for an auto-scrubber because they do not use heat to clean. I have heard that the Viper, Micro Max, Swan B and Clarke Focus are good brands.  The prices vary so much that the customer will have to determine how much they want to invest. I recommend the customer contacting a local janitorial service to "test" several models prior to purchasing their units. They may find one on Craig's list as well.



iv.
Rinse with clean water and remove with a wet vacuum or floor extractor.


v.
Repeat rinsing until water removed is clean


vi.
Allow to dry before use.
2.
Spot Cleaning

a. Liquid Spills


i.
First remove liquid with a dry clean cloth. Then clean affected area with a neutral pH cleaner such as CleanVia           CV1000, CleanBreak Cleaner, Disinfectant or Taski profi cleaner and the rinse and dry.

b. Pet urine or solid waste


i.
First remove solid waste and blot up excess moisture.


ii.
Treat affected area with CleanVia CV1000, CleanBreak Cleaner, Disinfectant or Taski profi cleaner. For outdoor use Gone (tm) specifically designed to neutralize odors and remove stains, Do not use strong chemical cleaners such as ammonia, bleach or solvents (noting with petroleum products in it)


iii.
Clean affected area with CleanVia CV1000, CleanBreak Cleaner, Disinfectant or Taski profi cleaner.


iv.
Rinse and dry.
3.
Heavy Soil


i.
Same as initial/Daily maintenance except use higher concentration of neutral cleaner as listed above.



Main Rubber Matting Menu

Product List
Site Map
Quotations
Shipping
Terms

New Century NORTHWEST LLC
775 Vincent Street
Eugene, Oregon 97401
Phone: (541) 342-4500 Fax: (541) 485-5566
E-MAIL sales@ncnwest.com HOME PAGE